您现在位于：首页 → 产品中心 → 金钟穆勒电气集团产品 → M-FL7 Leakage Circuit Breaker
[上海山合海融商贸有限公司](繁體中文 )是国内外 品牌的低压电器产品，安全防护产品，进口核相仪，西班牙lifasa公司电容器，验电器，接地线，放电棒，绝缘毯，绝缘手套，绝缘靴，巡更巡检系统，过电压保护器，电泳保护器，双电源等产品的代理商。
 
 

◆Technical parameter
■Electrical standards:
  a. IEC1008 (EN61008)
                     GB16916.1
  b. Operating time:   □No time delay
                                   G Minimum 10ms time delay
                                   S  Minimum 40ms time delay, selective type
  c. Rated voltage (Ue): 230V/400V; 50/60Hz
  d. Rated current: 16, 25, 40, 63, 80A
  e. Rated leakage current I△n: 10, 30, 100, 300, 500mA
  f. Sensibility:        AC type          A type
  g. Short time withstand current: 10kA--63A gL fuse
                            10kA--80A gL fuse
  h. Climatic environment resistance: IEC1009
  j. Case protection level: IP40 (after installation)
  k. Life: electrical life: more than 4000 times of on-off operation
Machinery life: more than 20000 times of on-off operation
■Machinery parameter
  a. Installation mode: use IEC standard guide
  b. Terminal connecting capacity: conductor 1-25mm2
  c. Accessories: busbar thickness 0.8-2mm
  d. Case width: 2 poles 35mm; four poles 70mm
◆Main characteristic
■Double function connecting terminal, connecting
    busbar block and single-core conductor
■Contact mode indicator
■Different leakage operating current specs.
■Keep electrical equipment from false tripping.
◆Outline size

Besides other announcement, 2-pole switch width is 2 modulus; 4-pole (3P+N) is 2 modulus.
Operating function is
independent of main circuit voltage, suitable for leakage protection and additional protection.
Rated current In (A)
 Rated leakage current I△n

 
Type

 Rated current In (A)
 Rated leakage current I△n

 
Type


Keep electrical equipment from false tripping.
16
0.01
M-FL7-16/2/0.01
25
0.03
M-FL7-25/2/0.03
25
0.10
M-FL7-25/2/0.1
25
0.03
M-FL7-25/2/0.03
40
0.03
M-FL7-40/2/0.03
25
0.10
M-FL7-25/2/0.1
40
0.10
M-FL7-40/2/0.1
40
0.03
M-FL7-40/2/0.03
40
0.30
M-FL7-40/2/0.3
40
0.10
M-FL7-16/2/0.1
40
0.50
M-FL7-40/2/0.5
63
0.03
M-FL7-63/2/0.03
63
0.03
M-FL7-63/2/0.03
63
0.10
M-FL7-63/2/0.1
63
0.10
M-FL7-63/2/0.1
63
0.30
M-FL7-63/2/0.3
63
0.30
M-FL7-63/2/0.3
80
0.03
M-FL7-80/2/0.03
63
0.50
M-FL7-63/2/0.5
80
0.10
M-FL7-80/2/0.1
80
0.03
M-FL7-80/2/0.03
80
0.30
M-FL7-80/2/0.3
80
0.10
M-FL7-80/2/0.1
80
0.30
M-FL7-80/2/0.3

〖 Print this page 〗 〖 TOP 〗 〖 CLOSE 〗