MCE ADV

上海山合海融商贸有限公司现有一只 MCE06ADV400 功率因素控制器现货提供，该型号可控制6回路，电压400V，随时可以发货。

Power factor controllers MCE ADV
MCE ADV功率因素控制器

Power factor controllers MCE-6 ADV (6 steps) and MCE-12 ADV (12 steps) are designed to measure the requirements of reactive energy of an installation and give the orders of connection and disconnection of capacitors so as to keep the set up cos φ.
功率因数控制器MCE-6 ADV(6路)和MCE-12 ADV(12路)是针对测量装置的无功功率要求而设计的,它给出电容器的连接与断开顺序,以保持设定的功率因素cosφ。

Plug and Play
即插即用

When a power factor controller is installed, a number of parameters need to be set up for a proper operation. Some of these parameters might be hard to know, such as, for example, the voltage phases or the correspondence of the measured current with its voltage, as well as the current transformer ratio. Controller MCE ADV incorporates a smart automatic process that detects the necessary parameters, such as:
当安装功率因数控制器时，需要设置多个参数以进行正确的操作。这些参数中的一些可能很难知道（获取），例如，电压相位或测量的电流与其电压的对应关系，以及电流互感器比。控制器MCE ADV结合了智能自动过程，可以检测必要的参数，例如：

• C/K: calculates the ratio of the current transformer and the power of the smallest step.
  检测和计算电流互感器的比和最小阶的功率。
• Phase: Identifies the voltage sequence and correspondence with the current. In other words, it identifies the UL1, UL2, UL3, when the current measured is IL1, IL2, IL3 and whether it has been connected in the opposite way.
  相位：识别电压序列和与电流的对应关系。换句话说，它识别UL1、UL2、UL3，当测量的电流是IL1、IL2、IL3以及它是否已经以相反的方式连接。
• Number of stages installed and Program: by sequential connection of all steps it finds out how many steps are installed and then calculates the program, i.e., the power ratio between capacitors.
  安装级数和程序：通过顺序连接所有步骤，找出安装了多少步骤，然后计算程序，即电容器之间的功率比。