Project Description产品描述
Capacitor with fuse and contactor CAB
CAB带熔断器和接触器的电容器
CAB series are formed by connecting a POLB or FML three-phase power factor correction capacitor to HRC fuses, contactor, fast discharge resistors and limiting inductances. Control can be done by an external signal through a terminal block or by an on/off switch included in the equipment.
CAB系列通过将POLB或FML三相功率因数校正电容器连接到HRC熔断器、接触器、快速放电电阻器和限制电感而形成。可以通过外部信号通过终端块或由设备中包含的开/关开关来完成控制。
These capacitors are specially designed for the individual compensation of transformers, hoisting motors equipments and motors with star/delta starter or electromagnetic brake.
这些电容器是专门为变压器、提升电机设备和带有星形/三角形起动器或电磁制动器的电机的分别补偿而设计的。
Accessories: Automatic controller
附件： 自动控制器
| Rated voltage 电压范围 | 230 … 440 V |
| Frequency 频率 | 50 Hz – 60 Hz |
| Capacitor (Type 1) 电容器（类型1） | POLB (only enclosure) |
| Capacitor (Type 0) 电容器（类型0） | FML |
| Discharge resistors 放电电阻 | Fitted |
| Max. overvoltage 最大过电压 | 1.1 Un |
| Max. overcurrent 最大过电流 | 1.3 In |
| Insulation level 绝缘水平 | 3 kV rms / 15 kV cresta |
| Temperature range 温度范围 | – 40/ +55ºC |
| Terminals 接线端头 | M10 |
| Colour 颜色 | RAL 7035 |
| Standards of fuses 熔断器标准 | IEC 269, IEC 60269-1 |
| Standards 标准 | IEC 60831, EN 60831 |
Other powers, voltages and frequencies on request.
其他功率，电压和频率可按要求定做。
| File | Date | Size |
| Datasheet 产品资料 | 06/06/2018 | 0.16 MB |
| Manual 说明书 | 30/05/2018 | 0.06 MB |
